How to Fix a Toilet That Keeps Running?

How To Fix a Toilet That Keeps Running

When your toilet won’t stop running, it’s like a tiny water symphony in your bathroom that you never asked for. Not only is it annoying, but it can skyrocket your water bill too. Luckily, fixing a persistent toilet isn’t as daunting as it sounds.

Start by checking the flapper for leaks. A common culprit behind that endless flush sound. Then, take a look at the float mechanism; an adjustment here might do the trick.

If those don’t pan out, replacing the fill valve or inspecting the chain length could be next on your to-do list. Speaking of lists eludes me sometimes – oh, right! That reminds me about looking into possible wear and tear inside the tank itself.

Check the Flapper for Leaks

When tackling a constantly running toilet, start with the flapper. This piece is crucial for creating a water-tight seal in your tank. Over time, it can wear or not fit properly anymore.

First, inspect the flush valve seat that your flapper rests on. Run your finger around its edge looking for any nicks or irregularities which could prevent a solid seal and necessitate replacing this part. If you’re working with brass overflow pipes requiring an adapter ring, ensure it’s squarely aligned over the drain to avoid leaks.

Sometimes adjusting this pipe left or right helps center the flapper perfectly above the drain hole. Another common issue arises if there’s space between half of the backside of your flapper and its seating area.

For persistent slow leaks that are impossible to spot directly, consider changing out old parts even if they appear serviceable at first glance. Chlorinated cleaning tablets can warp parts, leading to sudden failures and unexpected floods, making preemptive maintenance through reputable toilet repair services invaluable. 

Adjust the Float Mechanism

Adjusting the float mechanism can make a significant difference in preventing your toilet from continuously running. This involves setting the correct water level in the tank. If it’s too high or too low, issues occur.

A properly set float prevents overflow and ensures efficient flushes. First, locate the adjustable float which controls this level. Older models feature a brass rod that needs bending for adjustment, while newer ones often have a screw or clip for easy modification.

Aim to align with markings inside the tank indicating optimal levels; if these are lacking, mark an inch below the overflow tube as a reference. After adjustments are made by raising or lowering this component based on observation of where the water stops post-flush, ensure multiple tests are performed to verify accuracy. Adjusting doesn’t require complex tools, yet proper finetuning is essential for stopping undue flow and dramatically improving functionality without professional intervention.

Replace the Fill Valve

To replace the fill valve, first shut off your toilet’s water supply. This step prevents any spillage during repair. Unscrew the old fill valve found inside the tank.

This might require some effort due to its tight fit or corrosion over time. Once removed, install a new fill valve by securing it at the base of the tank where you detached the previous one. Ensure that it’s tightly fitted to avoid leaks.

Next, adjust this newly installed fill valve according to your specific toilet model requirements. Set it so that when filled, water stops an inch or two below the top of the overflow tube in your tank. Lastly, reconnect everything and slowly turn on your water supply while carefully watching for any signs of leakage around new fittings.

With these steps followed meticulously, replacing a faulty fill valve can effectively fix common issues with toilets continuously running without professional intervention.

Leave a comment

Your email address will not be published. Required fields are marked *

Call Now