Pomona, CA

Toilet Fill Valve & Flapper Replacement Bow Tie Plumbing & Rooter responded to repair two toilets with worn internal components. Downstairs Hallway Bathroom Toilet Work Performed Flushed the toilet multiple times during inspection and confirmed the fill valve was leaking Removed the existing fill valve and flapper Installed a new fill valve and flapper Tested the toilet to verify proper flushing and leak-free operation Results The toilet is now operating properly, and no leaks were observed at the time of completion. Upstairs Master Bathroom Toilet Work Performed Removed the existing fill valve and flapper Installed a new fill valve and flapper Tested the toilet to verify proper flushing and operation Results The toilet is now operating properly and functioning as intended.

Kitchen Sink Air Gap & Disposal Hose Repair Upon arrival, I was dispatched to investigate a leak beneath the kitchen sink. Findings Determined the leak was caused by a blocked garbage disposal drain hose and a loose air gap assembly. Work Performed Removed the existing air gap assembly Replaced the air gap with a new unit Removed the blocked garbage disposal drain hose Installed a new disposal hose Secured all connections and restored proper drainage flow Tested the sink and disposal by running water to verify proper operation and confirm there were no leaks Results The leak was successfully repaired, and the kitchen sink drain system is now operating properly with no leaks observed at the time of completion.

Hallway Bathroom Shower Drain Cleaning Upon arrival, I was dispatched to address a clogged shower drain in the hallway bathroom. Work Performed Cleared the blockage from the shower drain line Removed hair buildup from the drain, which was causing the stoppage Restored proper drainage flow to the shower Tested the drain to verify proper operation after service Results The shower drain was successfully cleared and is draining properly at the time of completion.

Tub Drain Cleaning & Sterling Stem Replacement Tub Drain Cleaning Upon arrival, I was dispatched to address a tub stoppage. Work Performed Cleared the blockage from the bathtub drain line Restored proper drainage flow to the tub Tested the drain to verify proper operation after service Results The tub drain was successfully cleared and is draining properly at the time of completion. Warranty 30-day warranty on stoppage clearing Sterling Faucet Repair Work Performed Removed the existing Sterling stems and seats Installed three new Sterling stems and seats Restored water service and tested the fixture for proper operation Verified proper water flow and leak-free performance after installation Results The faucet assembly is now operating properly and functioning as intended at the time of completion.

Bow Tie Plumbing & Rooter responded to a call for a possible leaking shower pan/ leak in primary bathroom upstairs. Upon arrival, customer directed technician to the primary bathroom shower where water damage was observed near the corner of the shower doors and surrounding caulking. Technician performed testing by running water through both sides of the shower door assembly and found water leaking out from the shower door area. Findings indicate the shower door enclosure allowing water to escape during use. No charge for today’s inspection and testing.

Icemaker Condensate Pump & Water Line Installation Upon arrival, I was dispatched to install drainage and water supply connections for an icemaker machine. Scope of Work Install new condensate pump for icemaker drainage system Connect 5/8-inch plastic drain line from condensate pump to existing 1 1/2-inch tubular kitchen sink drain Install new 3/8-inch plastic water supply line for icemaker connection Install new 3/8-inch plastic ball valve for water shut-off and isolation Secure all drain and water line connections Test system for proper operation and leak-free performance The new setup provides proper drainage and a dedicated water supply connection for reliable icemaker operation. Warranty 1-year warranty on workmanship

Bow Tie Plumbing & Rooter will install approximately 50 feet of 1/2-inch Type L copper piping to provide a durable and professionally supported water line installation. Scope of Work Install approximately 50 feet of 1/2-inch Type L copper pipe Install Unistrut supports approximately 6 to 8 inches above the finished floor to provide secure pipe mounting Secure piping using cushion clamps spaced every 4 feet for proper support, stability, and vibration reduction Install two new 1/2-inch ball valves: One located at the end of the pipe run One located in front of the newly added tee connection Secure and test all fittings, valves, and connections for proper operation and leak-free performance All piping and valves will be professionally installed to ensure durability, accessibility, and reliable system performance.

Upon arrival, I evaluated the plumbing system and discussed the customer’s concerns and upgrade needs. After a thorough inspection, I provided an estimate for a complete plumbing upgrade to improve reliability, water flow, and overall system performance. Recommended Services Whole home repipe to replace aging or failing water lines New water service line installation for improved supply and durability Water heater replacement to ensure efficient and reliable hot water Laundry drain relocation to improve layout and functionality Updated venting modifications to ensure proper drainage and code compliance All recommendations were reviewed with the customer, and scope of work was explained in detail. Pricing and options were provided for consideration.

Upon arrival, I addressed a clogged kitchen sink drain reported by the customer. Access was made through the wall cleanout located in the garage. Work Performed Accessed kitchen drain line through garage wall cleanout Ran professional drain cable upstream through the line to locate and break up blockage Successfully cleared heavy grease buildup within the drain line Restored proper flow to the kitchen sink drainage system Tested drainage to confirm proper operation after clearing Findings The stoppage was caused by a significant accumulation of grease buildup within the drain line, which is a common cause of recurring kitchen sink clogs.

To jackhammer footing to locate 2 in kitchen sink drain line remove plastic fitting that connects to laundry line will possible have to cut stucco and install new cleanout and approximately 2 ft underneath house. 1 yr warranty on workmanship.