Rancho Cucamonga, CA

A toilet was clogged at the base of the stairs. I used a hand auger to dislodge the blockage, successfully restoring water flow. I ensured the toilet functioned properly and provided no warranty on the auger used.

I carefully relocated the hot and cold water lines and drain line for the vanity, ensuring everything was properly connected. I also installed a new angle stop for the toilet, making sure it was securely in place and functioning correctly.

Call out to low pressure issues. Technician on site removed aerators and flushed debris from the kitchen faucet, hallway sink and shower to restore flow.

Customer requested an estimate due to low house water pressure. Upon inspection, checked house pressure and confirmed pressure was very low. Determined the pressure regulator is failing and needs replacement. Recommend redoing the entire water riser assembly to properly correct the issue and bring everything up to proper standards. ⸻ Recommended Work: • Excavate front yard area (remove rocks and dirt approximately 2 feet deep) to expose water service line. • Transition exposed PVC piping into copper (no PVC left exposed above ground). • Install new shut-off valve for irrigation line. • Install new main water shut-off valve. • Install new pressure regulator. • Install new hose bib. • Reconnect new riser assembly back to house water system. • Backfill area after completion. All work will be properly secured and tested for leaks and correct pressure operation. ⸻ Warranty: • One-year warranty on workmanship

To install customer supplied fiberglass service sink with pull down sprayer faucet in garage next to washing machine will have to cut drywall behind washing machine and dryer to locate 2 in waste and water lines .Will turn off water main drain system install 1/2x 1/2propress tees on cold and hot water lines will install approximately approximately 40ft of 1/2 copper pipe expose on drywall and install two 1/2x3/8 compression 1/4 turn angle stops. Also will install 2 in and 1 1/2 abs pipe expose on wall will strap all water lines and drain line to drywall reconnect waste to 2in abs drain and install a 2in abs cleanout behind washing machine and dryer.

Master bathroom toilet leaking from base. Pulled and reset toilet with new wax ring and closet bolts. Installed customer supplied toilet seat and bidet. 1 year warranty on workmanship. No warranty on customer supplied parts.

Customer called for a dryer vent that was full of water and could not use the dryer. Upon arrival, we inspected the vent and used a shop vacuum to remove all the water until proper airflow was restored. After removing the water, we tested the dryer and confirmed it was working properly again. We also used a camera to inspect the vent line and verified there were no blockages. Vent is now functioning correctly.

Customer called for issues with the garbage disposal. Upon arrival, tested unit by running water and operating the disposal. After inspection and testing, determined the garbage disposal had failed internally and was no longer functioning properly. Replacement was necessary. Work Performed: • Removed existing garbage disposal. • Installed new garbage disposal unit. • Reconnected drain and electrical connections. • Tested unit by running water and operating disposal. • Verified proper operation and confirmed no leaks. Warranty: • Includes one-year warranty on workmanship through Plumbing.

We installed a new toilet provided by the customer, ensuring a perfect fit. We also installed a new toilet flex, guaranteeing a secure and leak-free connection.

On upon arrival customer show me bathroom and said line had already clear ran water check ok. Recommend to hydro Jett sewer main thru thur clean out on wall.

Upon arrival, the customer directed us to the garage where water was present. We then inspected the downstairs bathroom and found that the floor was hot. Based on our findings, the home has a slab leak. To accurately locate the source of the leak, we will perform professional leak detection services. This process allows us to pinpoint the exact leaking line before any major repairs are made. To access the plumbing system and locate the manifold, drywall will need to be opened in a few areas where the leak is suspected. Once the leaking line is identified, we will determine the best repair solution. In this case, rerouting the affected water line will likely be recommended to properly address the issue. Once the leaking line has been confirmed, we will abandon the damaged section of pipe beneath the slab and reroute a new water line through the walls and/or ceiling, avoiding further disturbance to the concrete foundation. This reroute includes: -Isolating and disconnecting

Service Summary – Toilet Backup and Clog Removal Called out for a toilet that was backing up. Upon arrival, an auger was initially used in an attempt to clear the clog; however, the blockage was located further down the line and could not be cleared from the top. To properly resolve the issue, the toilet had to be removed in order to access the drain and run a mainline cable. The clog was successfully located and removed, restoring proper drainage. After clearing the blockage, the toilet was reinstalled. During reinstallation, it was also noted that the existing water supply line was in poor condition. The supply line was removed and replaced to ensure safe and reliable operation. Once all work was completed, the system was tested for proper flushing, drainage, and leaks. The toilet is now functioning properly with no further issues at this time.

I used the hydro Jetter (hydrojetting, hyndrojetter) to clear the sewer line, ensuring smooth flow and preventing blockages. This maintenance work helps keep the system efficient and functional.

to clear lav stoppage through the top

Called for a mainline stoppage. Upon further inspection, determined that we needed to run a cable through the roof due to the absence of an accessible exterior cleanout for the main line. The only cleanout is located inside the master bathroom. However, both bathtubs were full of water, and removing the interior cleanout could have caused the master bathroom to flood. The best solution was to access the line through the roof vent and run the cable from there. We were able to successfully remove the clog. After clearing the line, we tested the system by running water throughout the home to ensure proper drainage. The line is now draining properly. A camera inspection was also performed to identify the cause of the backup. At this time, everything is flowing and draining correctly.